Renogy's DCC50S DC to DC MPPT on-board Battery Charger is designed to give you options! This multi-stage, multi-input battery charger can charge a service battery from an alternator connected to a starting battery or by utilizing solar panels connected directly to the unit. While your vehicle's alternator prioritizes your starting battery, this unit will allow your solar system to charge your service battery first! It's the smart way to keep yourself fully charged and off-grid longer! And with multi-stage charging and multi-chemistry functionality, Renogy's DC to DC MPPT Charger has you covered whether you're using Flooded, Gel, AGM, or Lithium batteries.
If you have any questions regarding this product, please call us at 1 (909) 287-7111 or email email@example.com.
- Designed to charge service batteries from two DC inputs—solar panels and alternator.
- Built-in Maximum Power Point Tracking (MPPT) to maximize the solar power.
- 3-phase charging profile (Bulk, Boost, and Float) ensures your service battery will be accurately charged at the correct voltage levels to 100%.
- Built-in Voltage Sensitive Relay (VSR) for easy setup with traditional alternators.
- Compatible with smart alternators (with variable output voltage).
- Trickle charges the starting battery via solar panels if the service battery is fully charged.
- Isolation of the starting battery and the service battery.
- Temperature and voltage compensation features prolong battery life and improve system performance.
- Smart Protection Features: battery isolation, over-voltage protection, battery temperature protection, over-current protection, overheat protection, reverse current protection, solar panel and alternator reverse polarity protection.
- Compatible with multiple battery types: AGM, GEL, Flooded, and Lithium.
- Compact with a sturdy design, it was built tough for all conditions.
- Battery Charger X 1
- Battery Temperature Sensor X 1
- IGN Signal Wire X 1
- RS485 Communication Cable X 1
|System Voltage : 12VDC||Battery Voltage Range : 9-16VDC|
|Maximum Charging Current : 50A (25A Alternator / 25A PV)||Battery Type : SLA, GEL, FLD, LI, USER|
|Backup Battery Charging Mode : MPPT||Charging Efficiency : Up to 97%|
|Max. Solar Input Voltage : 25V||Maximum Solar Input Power : 660W|
Alternator Input Voltage : Traditional Alternator: 13.2-16VDC Smart Alternator (Euro 6): 12-16VDC"
|Maximum Alternator Input Power : 660W|
|Self-consumption : 60mA||Operating Temperature Range : -22°F~149°F / -5°C~65°C|
|Dimensions : 9.6 x 5.7 x 3.0 in / 244 x 146 x 77 mm||Weight : 3.13 lbs / 1.42 kg|
|Accessories||1-year material warranty|