100W 12V Monocrystalline Solar Starter Kit w/Wanderer 10A Charge Controller

100W 12V Monocrystalline Solar Starter Kit w/Wanderer 10A Charge Controller

PLUS $183.99


Renogy's fulfillment center will remain open to ensure that you are equipped with the reliable energy solution. Please note that due to an increase in order volume, there may be a slight delay. Thank you!



The Renogy 100W Solar Power Starter Kit is perfect for new customers wanting to get a start in solar. The Starter Kit is great for off-grid applications, such as RVs, trailers, boats, sheds, and cabins — providing many benefits, including, but not limited to, quiet power production and grid independence. Adding a polycrystalline or monocrystalline solar panel kit can extend your travels further then ever before.

This solar kit comes with the tools necessary for a new system: one Renogy 100W 12V Mono Solar Panel, one 10A PWM Wanderer Charge Controller, one 20ft 12AWG Solar Adaptor Kit, one 8ft 12AWG Tray Cable, and one set of Z-brackets. Start your solar adventure with a Renogy Starter Kit.

If you have any questions regarding this product, please call us at 1 (909) 287-7111 or email support@renogy.com.

Key Features

  • High solar cell efficiency : Monocrystalline 21%, Polycrystalline 18.6%
  • EL tested solar modules; no hot-spot heating guaranteed
  • Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades
  • TPT back sheet ensures smooth performance over a long period of time
  • IP65 rated junction box provides complete protection against environmental particles and low pressure water jets
  • Sealed, Gel Flooded and Lithium charging algorithm ready
  • 4-Stage battery charging process for a rapid, efficient, and safe battery charging
  • The Renogy Wanderer is equipped with multiple electronic protections; overcharging, overload, short-circuit and reversed polarity
  • Pre-drilled holes on the back of the panel allow for fast and secure mounting
Renogy 100W Monocrystalline Solar PanelWanderer 10A PWM Charge Controller
Maximum Power: 100W Nominal Voltage: 12V/24V Auto Recognition
Maximum System Voltage: 600V DC (UL) Rated Charge Current: 10A
Open-Circuit Voltage (Voc): 22.3V Max Gauge Size: Up to 12AWG
Short-Circuit Current (Isc): 5.86A Max. PV Input Voltage: 50 VDC
Optimum Operating Voltage (Vmp): 18.6V Self-Consumption: <10mA
Optimum Operating Current (Imp): 5.38A Temperature Compensation: -3mV/°C/2V
Weight: 14.3lbs/6.5kg Weight: 0.27 lbs / 122.47g
Dimensions: 42.4 x 20.0 x1.4 in Dimensions: 4.7 x 3.0 x 1.1 in / 119 x 75 x 27.5mm
Renogy 8ft 12AWG Tray Cables (A pair)Mounting Z Brackets (Set)
Length: 8ft Eight Long Cap Bolts and Four Short Bolts
AWG: 12 Four Spring Washers and Four Washers
Rating Voltage: 600/1000V Four Z Shape Solar Panel Brackets
Temperature: -40°F to +185°F Four Nuts
Renogy Adaptor Kit (Set) 
Length: 20ft  
AWG: 12  
Rating Voltage: 600/1000V  
Temperature: -40°F to +185°F  

Warranty Information


25-year power output warranty: 5 year/95% efficiency rate, 10 year/90% efficiency rate, 25-year/80% efficiency rate

5-year material and workmanship warranty

Accessories 1-year material warranty
Please click the links below to download the manuals:
Wanderer 10A PWM Charge Controller
Mounting Z Brackets