700W/1000W/2000W/3000W 12V Pure Sine Wave Inverter

No, this inverter is only compatible with a 12V battery system. It cannot be used with a 24V system.

No, the Renogy 12V DC to 120V AC inverter only converts DC power to AC power. To charge your batteries, consider the Renogy Pure Sine Wave Inverter Charger, which is available in 12V 1000W and 12V 2000W options.

To select the right inverter, consider the following:

1. Sizing the Right Power Output:

Choose an inverter that can handle 1½ times the total wattage of the devices you plan to run simultaneously.

• Example: If you have a 500W fridge and 800W air conditioning, the total load is 1300W. You would need an inverter rated for at least 1300W or higher.

• Renogy 2000W or 3000W inverters are suitable for such loads.

2. Check Your Battery Voltage:

Ensure the inverter is compatible with your battery’s voltage (e.g., 12V).

3. Size Your Installation Space:

Make sure the inverter fits in your designated area with adequate ventilation.

4. Remote Operation:

Renogy inverters come with remote control and DC HOME APP options for convenient operation from a distance.

Modified Sine Wave (MSW) inverters are less expensive and work for basic appliances, but may cause issues with sensitive electronics or audio equipment, causing them to run hotter and less efficiently.

Pure Sine Wave (PSW) inverters are more expensive but offer clean, stable power, making them ideal for sensitive electronics, inductive loads (e.g., microwave ovens, motors), and providing quieter, cooler operation. PSW inverters have lower total harmonic distortion (THD) than MSW inverters, offering cleaner power like the grid.

For optimal performance, always use the thickest wire possible and keep the cable length as short as possible. The package does not include battery cables, but we recommend using 4/0 AWG cables for the best results.

Yes, as long as the lithium battery is rated for 12V applications, it will work with this inverter.

The battery inverter converts DC power from the battery or solar panels into AC power, making it compatible with household appliances and devices. Without an inverter, the DC electricity produced by solar panels is unusable for AC-powered devices.

MSW inverters provide a rugged waveform that can cause interference or inefficiency in certain appliances, especially sensitive electronics.</br>PSW inverters provide a smoother, more consistent waveform, similar to utility power, and are better suited for running inductive loads like microwave ovens and motors, with less noise and more efficient operation.

There are several reasons your appliances might trip the inverter:

1. Overloading:
Running multiple appliances simultaneously can exceed the inverter's capacity, triggering over-current and over-voltage protection.

2. Inductive Loads:
Appliances like air conditioners and refrigerators have high starting currents that can cause trips.
Pay attention to the peak current and voltage of inductive loads.

3. Short Circuits:
A short circuit in any appliance can trip the inverter.

Loose Wiring:
4. Poor connections or loose circuit wiring can cause trips. Inspect and tighten any loose connections.

You can use loads with a power rating of 3000 watts or less, such as a portable freezer, microwave, or Renogy 12V 400Ah batteries. However, avoid running all devices simultaneously if their combined power consumption exceeds 3000 watts.

Unfortunately, this inverter does not support Bluetooth connectivity, so there is no compatible Bluetooth module available for monitoring.