200 Watt 12 Volt Monocrystalline Foldable Solar Suitcase

200 Watt 12 Volt Monocrystalline Foldable Solar Suitcase
SKU: RNG-KIT-STCS200D-VOY20-US

12% off for a limited time.
$399.99 PLUS $351.99

Availability:

Renogy's fulfillment center will remain open to ensure that you are equipped with the reliable energy solution. Please note that due to an increase in order volume, there may be a slight delay. Thank you!

Out Of Stock
 

Description

This portable solar panel is perfect for the adventurous traveler, providing both convenience and dependability when venturing off the grid. The Renogy 200W Solar Suitcase comes with two 100W Monocrystalline Solar Panels, one 15in set of wires with Solar connectors, and one protective soft case for safe portability. With its adjustable aluminum stand, latches, and heavy duty handle, this 200W Solar Suitcase will change the way the world looks at portable power.

If you have any questions regarding this product, please call us at 1 (909) 287-7111 or email support@renogy.com.

Key Features

Reliable
  • Adjustable, corrosion-resistant aluminum stand.
  • Heavy duty handle and latches for longevity.
  • Protective casing.
Smart
  • Compatible with gel, sealed, lithium, and flooded batteries.
  • Charge controller with LCD display for displaying operating information and data.
Safe
  • 20A built-in 5-stage solar charge controller provides overcharge protection, reducing fire risk.
  • Negative-ground charge controller for compatibility with an RV, boat, trailer, etc.
  • The low-voltage system avoids electrical shock hazards.
Portable Power
  • Easy to pack and setup solar power kit. Foldable, and sturdy solar panel for outdoor activities, hiking, camping, events, road trips, and easy to carry off grid power.
Easy to Use
  • Read to power your car or RV battery bank anytime. Easy alligator clip and battery connection using the provided adaptor cables.
 

Package Includes

200 Watt Mono Foldable Solar Suitcase

200 Watt Monocrystalline Foldable Solar Suitcase

1 x

20A Voyager Charge Controller

Renogy 20A PWM Charge Controller

1 x

Alligator Clips

Alligator Clips

1 x

200 Watt Monocrystalline Foldable Solar SuitcaseRenogy 20A Voyager Charge Controller
Maximum Power at STC: 200W Nominal Voltage: 12 VDC
Open-Circuit Voltage: 21.8 V Rated Charge Current: 20A
Short Circuit Current: 11.7A Max. PV Input Voltage: 26 VDC
Optimium Operating Voltage: 18.5V Grounding: Common Negative
Optimum Operating Current: 10.5A Self-consumption: ≤8mA
Operating Temperature:: -40°C to 90°C Operating Temperature: -40°F to 185°F
Dimension: 35.6 x 25.9 x 3.1 in Dimensions: 6.38 x 3.82 x 1.34 inches
Weight: 35.9 lbs Weight: 0.88 lbs
SOLAR CONNECTOR TO ALLIGATOR CLIPS 14 AWG CABLE 
Length: 7.5ft Rated Current: 15A built in Fuse
AWG: 14 Solar Connector Input, Alligator Clip End


Warranty Information

Panels

25-year power output warranty: 5 year/95% efficiency rate, 10 year/90% efficiency rate, 25-year/80% efficiency rate

3-year material and workmanship warranty

Accessories 1-year material warranty
 
1.What do I need to complete my off-grid solar power system ?
 
A solar panel has to be connected a charge controller to regulate current, and a battery to store the electrical power. You will need adapter kit cables to wire the solar panel(s) and charge controller, and tray cables connecting the charge controller to a deep-cycle battery.
2. What does off-grid and on-grid mean ?
 
On-grid simply means solar power equipment (array or solar panel) is connected to the electrical grid, while off-grid refers to systems that are not connected to the grid and therefore store the generated power for later use. Off-grid systems are not affected by grid blackouts.
3. Why is my solar panel under producing ?
 
Solar panel performance may be hindered for a number of reasons. Most commonly environmental conditions such as indirect sunlight, temperature rise, cloudy sky, and dirt and stain build up on the top glass will cause a reduced power output.
4. How should I connect solar panels in my electrical circuit (series vs parallel)
 
Solar panels can be connected in series or in parallel to meet your electrical circuit size and power demand. Connecting solar panels in series will have the effect of adding up their operating voltage output, while system current output will be the same as that for one panel. While, connecting solar panels in parallel will have a different effect; individual panels operating current output will add up to be the system output current, while system output voltage will be the same as the output voltage of one solar panel. To meet the optimum power output and system rating for your power system, you can use both parallel and series connections.
5. How many solar panels do I need ?
 
The best way to gauge how many solar panels you need, is to understand and define the power load needed from this system. Power is measured in Watt, and capacity is commonly measured in Watt-hours (multiplying power output in watts by the required number of hours of operation multiplied by a safety factor of 1.5-2). Therefore, it is wise to size your battery bank first based on the minimum required capacity, and accordingly decide how many panels or how much power input is needed.
More questions about your off-grid power system? Learn more from Renogy Learning Center!
 
 
warranty
Please click the link to download the manuals:
20A Voyager PWM Charge Controller