【NOTE】All items that have been returned by a customer. There may be scratches on the surface or other cosmetic damage to the items, but this will not affect the performance of the products. All items listed have been thoroughly tested before being repackaged. Pictures may vary from the actual charge controllers received. For non-quality issues, we do not accept returns and exchanges.
The Renogy 100W Solar Starter Kit is easy for you to install, and it is the most economical choice for solar beginners. This Renogy Solar Kit includes the equipment necessary for building a new system: a solar panel, a charge controller, needed electrical wiring and Z-brackets, making it an ideal choice for both off-grid and mobile solar power applications.
This Starter Kit will produce an average of 500Wh of electricity per day (Based on 5 hours of direct sunlight conditions). The 100W solar panel doesn't take up much roof space, but its energy can offset some small loads.
The Starter Kit can build a reliable and environmentally friendly power supply, perfect for RVs, campers, boats, sheds, and cabins. It can also be installed as a power supply for outdoor appliances and emergencies, and as a stand-alone power system.
The bypass diode can ensure the panel has an excellent performance in a low-light environment and the TPT back sheet dissipates excess heat to ensure smooth output performance. The Cell Efficiency can reach 22%.
The Wanderer PWM charge controller features advanced 4-stage charging (bulk, boost, float, and equalization) to ensure your battery is efficiently and safely charged to 100%.
The Wanderer PWM Charge Controller is compatible with four different types of batteries: Sealed, Gel, Flooded, and Lithium batteries. Connecting the BT-1 Bluetooth module to the RS232 communication port, you can monitor the system status in real-time through the DC Home app.
Please note the BT1 Bluetooth Module is not included.
The corrosion-resistant aluminum frame with strong corner braces is designed for long-term outdoor use, giving the panels a long service life.
The IP65 Junction Box protects against environmental particles and low-pressure water jets. These IP67 waterproof solar connectors ensure that the water and dust will not enter the connector during extended outdoor use. Effectively preventing water from seeping in.
This Renogy Solar Kit includes the equipment necessary for building a new system. The necessary cables, Z-brackets, and pre-drilled holes on the back frame of the panel allow fast and secure mounting.
- If you have any questions regarding this product, please call us at 1 (909) 287-7111 or or submit a ticket for troubleshooting assistance.
- More questions about your off-grid power system? Learn more from Renogy Learning Center!
Package Includes
|
1 x |
Wanderer 10A PWM Charge Controller
1 x |
|
1 x |
Renogy 20ft 12AWG Solar Adaptor Kit (A pair)
1 x |
|
Renogy 8ft 12AWG Tray Cables (A pair)
1 x |
| Renogy 100W Monocrystalline Solar Panel | Wanderer 10A PWM Charge Controller |
|---|---|
| Maximum Power: 100W | Nominal Voltage: 12V/24V Auto Recognition |
| Maximum System Voltage: 600V DC (UL) | Rated Charge Current: 10A |
| Open-Circuit Voltage (Voc): 22.3V | Max Gauge Size: Up to 12AWG |
| Short-Circuit Current (Isc): 5.86A | Max. PV Input Voltage: 50 VDC |
| Optimum Operating Voltage (Vmp): 18.6V | Self-Consumption: <10mA |
| Optimum Operating Current (Imp): 5.38A | Temperature Compensation: -3mV/°C/2V |
| Weight: 14.3lbs/6.5kg | Weight: 0.27 lbs / 122.47g |
| Dimensions: 1062x530x35mm (41.8x20.9x1.38in) | Dimensions: 4.7 x 3.0 x 1.1 in / 119 x 75 x 27.5mm |
| Renogy 8ft 12AWG Tray Cables (A pair) | Mounting Z Brackets (Set) |
|---|---|
| Length: 8ft | Eight Long Cap Bolts and Four Short Bolts |
| AWG: 12 | Four Spring Washers and Four Washers |
| Rating Voltage: 600/1000V | Four Z Shape Solar Panel Brackets |
| Temperature: -40°F to +185°F | Four Nuts |
| Renogy Adaptor Kit (Set) | |
|---|---|
| Length: 20ft | |
| AWG: 12 | |
| Rating Voltage: 600/1000V | |
| Temperature: -40°F to +185°F |
Warranty Information
| Panels |
25-year power output warranty: 5 year/95% efficiency rate, 10 year/90% efficiency rate, 25-year/80% efficiency rate 6-month material and workmanship warranty |
| Accessories | 6-month material warranty |
A solar panel has to be connected to a charge controller to regulate current, and a battery to store the electrical power. You will need adapter kit cables to wire the solar panel(s) and charge controller, and tray cables connecting the charge controller to a deep-cycle battery.
 |
|||
 |
|||
| Please click the links below to download the manuals: | |||
| Wanderer 10A PWM Charge Controller | |||
| Mounting Z Brackets | |||
