Panel solar bifacial tipo N de 100/200 W
- · Get up to 30% more energy without taking more space.
- · Generate more power with high-efficiency N-Type solar cells.
- · Build a simpler system with less effort, cost, and complexity.
- · Keep generating power even when part of the panel is shaded.
- · Maintain more stable output through heat, clouds, and low light.
- · IP68 protection backed a 10-year warranty and 25-year output guarantee.
Panel solar bifacial tipo N de 100/200 W - 200W / 1 unidad está agotado y se enviará tan pronto como vuelva a estar disponible.
![](http://www.renogy.com/cdn/shop/files/100DCT_57b2de17-1c47-4e03-b872-097b58aa79ea.jpg?v=1781267901&width=100")
Panel solar bifacial tipo N de 100/200 W
More Power from Limited Space
Up to 30% More Energy from the Same Space
Capture sunlight from the front and reflected light from the back to generate more energy from the same panel footprint. Best results come when installed where the rear side can receive reflected light, such as on sand, snow, or light-colored surfaces.
Mismo Sol, Más Energía
La cosecha solar extra ayuda a mantener tu batería lista después del atardecer, dándote más tiempo para luces, dispositivos, refrigeración y la comodidad diaria fuera de la red.
Qué significa realmente un 30% más de energía
Hasta un 30 % más de energía no significa que cambie la potencia nominal del panel. Significa que el panel puede recolectar energía adicional de la luz reflejada en la parte posterior, lo que ayuda a enviar una carga más utilizable a su sistema cuando las condiciones de configuración son las adecuadas.
La configuración correcta libera más energía
Las ganancias bifaciales dependen del ángulo, la elevación y la reflectividad de la superficie. Levántela, inclínela y colóquela cerca de una superficie más brillante para que la parte posterior pueda captar más luz reflejada.
*En comparación con las celdas tipo P anteriores (21-23% de eficiencia de conversión)
*En comparación con las celdas tipo P anteriores (21-23% de eficiencia de conversión)
Sigue produciendo a pesar de la sombra parcial
Los paneles están divididos en dos zonas de energía independientes a través de un diseño en paralelo, de modo que si un lado está sombreado por una rejilla de ventilación, un árbol o un obstáculo en el tejado, el otro continúa generando a plena capacidad.
Llega intacto, permanece intacto
El embalaje reforzado protege el panel de cada golpe durante el tránsito. Lo que pide es lo que funciona.
Includes
Frequently Asked Questions
What do I need to complete my off-grid solar power system?
What do I need to complete my off-grid solar power system?
A solar panel has to be connected to a charge controller to regulate current, and a battery to store the electrical power. You will need adapter kit cables to wire the solar panel(s) and charge controller, and tray cables connecting the charge controller to a deep-cycle battery.
What do off-grid and on-grid mean?
What do off-grid and on-grid mean?
On-grid simply means solar power equipment (array or solar panel) is connected to the electrical grid, while off-grid refers to systems that are not connected to the grid and therefore store the generated power for later use. Off-grid systems are not affected by grid blackouts.
Why is my solar panel underproducing?
Why is my solar panel underproducing?
Solar panel performance may be hindered for several reasons. Most commonly, environmental conditions such as indirect sunlight, temperature rise, cloudy sky, and dirt and stain build-up on the top glass will cause a reduced power output.
How should I connect solar panels in my electrical circuit (series vs parallel)?
How should I connect solar panels in my electrical circuit (series vs parallel)?
Solar panels can be connected in series or in parallel to meet your electrical circuit size and power demand. Connecting solar panels in series will have the effect of adding up their operating voltage output, while the system current output will be the same as that for one panel. While connecting solar panels in parallel will have a different effect, individual panels' operating current output will add up to be the system output current, while the system output voltage will be the same as the output voltage of one solar panel. To meet the optimum power output and system rating for your power system, you can use both parallel and series connections.
How many solar panels do I need?
How many solar panels do I need?
The best way to gauge how many solar panels you need is to understand and define the power load needed from this system. Power is measured in Watts, and capacity is commonly measured in Watt-hours (multiplying power output in watts by the required number of hours of operation, multiplied by a safety factor of 1.5-2). Therefore, it is wise to size your battery bank first based on the minimum required capacity, and accordingly decide how many panels or how much power input is needed.
What are the Benefits of Using Bifacial Solar Panels?
What are the Benefits of Using Bifacial Solar Panels?
- Captures sunlight from both sides.
- More efficient and powerful than monofacial panels.
- Perform better in overcast weather.
- Install in any direction
