- The Kit will produce an average of 0.8-1.2kWh of electricity per day
- EL tested;5-year material and workmanship warranty.
- The kit has a complete set of accessories and is equipped with an In-line fuse and ANL fuse components to offer more protection.
- Easily monitor by your phone.
Safety every minute, efficiency every day
The Renogy Solar Premium Kit offers outstanding safety with a variety of certified accessories, guaranteeing an efficient solar system featuring globally renowned solar panels and a fully certified MPPT Charge Controller.
High-quality PERC solar panels
With a half-cell 9BB design, Renogy's PERC solar panel boasts a 22.5% higher cell efficiency. Crafted with premium materials, including a TPT backsheet and aluminum frame, the panel is protected from harsh environmental conditions over its lifetime.
Charge Controller with 8 built-in protections
The Renogy Rover Solar Charge Controller boasts 8 built-in protections, actively monitoring voltage, current, and load changes. These include overtemperature, low-temperature, reverse current, reverse polarity, short-circuit, overload, overcharging, and overdischarging safeguards for efficient and safe battery charging.
Renogy Fuse Solution
The Renogy Solar Premium Kit offers a reassuring fuse solution, comprising a fuse cable, ANL Fuse, and in-line fuse.
Series Wiring (12V)
To connect panels in series, Solar Y Branch Connectors are not required.
Parallel Wiring (12V)
To connect panels in parallel, you must use the included Solar Y Branch Connectors. Additionally, you'll need one more 10A in-line fuses for parallel wiring. You can purchase a Renogy 10A in-line fuse for this purpose.
4-Step Setup
Learn more
Package Includes
|
2 x |
Rover 20A MPPT Charge Controller
1 x |
|
1 x |
2 x |
|
1 x |
10A In-line Fuse and 20A ANL Fuse
1 x |
|
Solar Y Branch Connectors MMF+FFM Pair
1 x |
| Renogy 100W Monocrystalline Solar Panel | |
|---|---|
| Maximum Power: 100W | Maximum System Voltage: 600V DC (UL) |
| Open-Circuit Voltage (Voc): 24.3V | Short-Circuit Current (Isc): 5.21A |
| Optimum Operating Voltage (Vmp): 20.4V | Optimum Operating Current (Imp): 4.91A |
| Dimensions: 41.8 x 20.9 x1.4 in | Weight: 14.1lbs |
| 20ft 10AWG Solar Adaptor Kit (A pair) | Renogy 10A In-line Fuse Holder w/Fuse |
|---|---|
| Length: 20ft | Rated Current: 10A |
| Wire Gauge: 10AWG | Rated Voltage: 1000 V DC |
| Rating Voltage: 600/1000V | Contact Material: Copper, Silver Plated |
| Temperature: -40°F to +185°F | Replaceable Fuse: Cylindrical PV Fuse (10x38mm) |
| Mounting Z Brackets (Set) | Renogy 8ft 10AWG Tray Cables (A pair) |
|---|---|
| Eight Long Cap Bolts and Four Short Bolts | Rating Voltage: 600/1000V |
| Four Spring Washers and Four Washers | Length: 8ft |
| Four Z Shape Solar Panel Brackets | Wire Gauge: 10AWG |
| Four Nuts | Temperature: -40°F to +185°F |
| 2ft 10AWG ANL Fuse Cable | ANL 20A Fuse Set |
|---|---|
| Length and Wire Gauge: 2ft and 10AWG | Current Rating: 20A |
| Rating Voltage: AC Uo/U 0.6/1 KV, DC 1.8KV | Voltage Rating: 72V |
| Temperature: -40°F to +194°F | Interrupt Capacity: 40A |
| Solar Y Branch Connectors | BT-1 Bluetooth Module |
|---|---|
| Withstanding voltage: 1000V DC(TUV), 600V(UL) | Input Voltage: 5V |
| Temperature: -40°F to +194°F | Communication Range: ≤82ft |
| Protection Class: Class II | Compatible With: All Renogy Controllers with RJ12 port |
| Protection Degree: IP67, mated | Operating Temperature:- 20℃~85℃（-4°F to 185°F） |
| Rated Current: 50A |
| ROVER LI 20A MPPT CHARGE CONTROLLER | |
|---|---|
| Nominal Voltage: 12V/24V DC Auto Recognition | Rated Charging Current: 20A |
| Rated Load Current: 20A | Max. Battery Voltage: 32V |
| Max. PV Input Power: 260W/12V, 520W/24V | Max. PV Input Voltage: 100VDC |
| Operating Temperature: -35°C to +45°C | Max.Terminal Size: 8AWG |
| Rated Load Current: 10% to 90% NC | Overall Dimension: 8.3 x 5.9 x 2.3 in |
Warranty Information
| Panels |
25-year power output warranty: 5 year 95% output warranty, 10 year 90% output warranty, 25 year 80% output warranty 10-year material and workmanship warranty |
| Accessories | 1-year material and workmanship warranty |
1. What do I need to complete my off-grid solar power system ?
A solar panel has to be connected to a charge controller to regulate current, and a battery to store the electrical power. You will need adapter kit cables to wire the solar panel(s) and charge controller, and tray cables connecting the charge controller to a deep-cycle battery.
2. What does off-grid and on-grid mean ?
On-grid simply means solar power equipment (array or solar panel) is connected to the electrical grid, while off-grid refers to systems that are not connected to the grid and therefore store the generated power for later use. Off-grid systems are not affected by grid blackouts.
3. Why is my solar panel under producing ?
Solar panel performance may be hindered for a number of reasons. Most commonly environmental conditions such as indirect sunlight, temperature rise, cloudy sky, and dirt and stain build up on the top glass will cause a reduced power output.
4. How should I connect solar panels in my electrical circuit (series vs parallel)?
Solar panels can be connected in series or in parallel to meet your electrical circuit size and power demand. Connecting solar panels in series will have the effect of adding up their operating voltage output, while system current output will be the same as that for one panel. While, connecting solar panels in parallel will have a different effect; individual panels operating current output will add up to be the system output current, while system output voltage will be the same as the output voltage of one solar panel. To meet the optimum power output and system rating for your power system, you can use both parallel and series connections.
5. How many solar panels do I need ?
The best way to gauge how many solar panels you need, is to understand and define the power load needed from this system. Power is measured in Watts, and capacity is commonly measured in Watt-hours (multiplying power output in watts by the required number of hours of operation multiplied by a safety factor of 1.5-2). Therefore, it is wise to size your battery bank first based on the minimum required capacity, and accordingly decide how many panels or how much power input is needed.
6. Can I add more solar panels to the Rover 20A and expand my system power output?
Yes, more solar panels can be added to this system to increase the power output. The Rover 20A has a maximum PV input current of 20A, maximum PV input voltage of 100VDC, and maximum input solar power of 260W at 12V or 520W at 24V. You can wire more solar panels in series / in parallel to achieve larger power output, however you are limited by the maximum input voltage and current the charge controller can handle. It is safer to build a system operating at around 90% of the rated voltage and current to ensure there is a tolerance for any system overvoltage or overcurrent.
7. Will this solar kit power my AC unit ?
In order to determine what size solar kit is appropriate, you must first define the total load to be expected of the solar power system. Most manufacturers will publish a specification sheet of the AC unit online and will include a nameplate sticker on the AC body. Both can be used to determine the actual power rating of the AC. BTU is a common measuring unit for energy in AC and water heater products, however we are intrested in the energy rate, or simply power. Power will be listed in units of Watts, and can be used to determine the total load resulting from running the intended AC unit. Multiply the power rating recorded in watts by the total number of hours of operation intended, to obtain the total watt-hours. Divide the total watt-hours by the peak sun hours in the location of installation, and multiply by a safety factor of 1.5-2, to obtain the total number of watts your panels should produce to power the air conditioner load. The total power load can be divided by the power output of one panel to obtain the number of panels needed.
8. When do I need an inverter ?
If you intend to use this solar power kit as a power supply for home appliances (e.g. coffee maker, TV, etc.), then you will need an inverter to convert the output voltage from a 12 VDC system to a 120V AC output socket. Renogy offers a variety of inverter products to suit your unique system and meet your power demand.
More questions about your off-grid power system? Learn more from Renogy Learning Center!
 |
|||
 |
|||
| Please click the links below to download the manuals: | |||
| BT-1 Bluetooth Module | |||
| 20A Rover Charge Controller | |||
| Mounting Z Brackets | |||
