See your next adventure unfold with Renogy E.FLEX 220W portable solar panels. Ergonomic handles make these foldable panels easy to take with you when you’re on the go! They’re powered with PERC monocrystalline solar cells that boost conversion efficiency to 23.5%. E.FLEX 220W solar panels are super durable and scratch resistant with ETFE film and rugged corner guards – they last 3 times longer than panels made with PET. With IP67 waterproof rating and rugged corner guards, E.FLEX solar panel can deliver plenty of reliable power in the most demanding weather conditions. They’ll charge your portable power stations and batteries wherever your journey takes you.
*Solar connectors and charge controllers may be required. Sold separately.
Solar connectors allow you to quickly connect two E.FLEX 220 portable solar panels in a series or parallel connection to recharge portable power stations at blazing speed.
We know that bumps are inevitable in adventures and that's why E.FLEX 220 portable solar panel is geared with 4 corner guards to reduce the impact on solar cells.
From serene lakes to sunny meadows there's nothing better than escaping into the beauty of the outdoors. Whichever the trail takes you, the E.FLEX 220 solar panel is ready to go with you.
Unlock more ways to capture sunlight by hanging your E.FLEX 220 portable solar panel from trees, your camper or almost anywhere with pre-drilled mounting grommets.
- If you have any questions regarding this product, please call us at 1 (909) 287-7111 or or submit a ticket for troubleshooting assistance.
- More questions about your off-grid power system? Learn more from Renogy Learning Center!
- E.FLEX 220 Portable Solar Panel x 1
- 5-in-1 Solar Adapter Cable x 1
- Case x 1
- User Manual x 1
- Ewarranty card x 1
|Maximum Power at STC: 120W||Cell Efficiency:>22%|
|Optimum Operating Voltage (Vmp): 19.8V||Open-Circuit Voltage (Voc): 23.8V|
|Optimum Operating Current (Imp): 6.1A||Short-Circuit Current (Isc): 6.4A|
|Operating Temperature: -40℃ to 65℃ (-40℉ to 149℉)||Maximum Series Fuse Rating: 15A|
|Weight: 4.8 kg / 11.0 lb||Dimensions: 26.4 x 21.7 x 1.0 in(fold) / 26.4 x 43.4 x 0.2 in(unfold)|
|Panel Leads (Pair): 39.37in||Material and workmanship warranty: 1 years|
1. What kinds of devices can be charged with this panel?
2. Can I use non-Renogy branded power stations with E.FLEX 220W Portable Solar Panels?
3.Why is my portable solar panel underproducing?
4. How should I connect multiple solar panels for my system? Should I use a series or parallel configuration?
E.FLEX 220W portable solar panel can be connected in series or parallel configuration or array. How you choose to connect multiple solar panels depends both on the size of your off-grid solar system and your power needs.
Connecting solar panels in a series increases the voltage of the system, leaving the system current output the same as a single panel. The total amount of voltage of a series-connected array can be measured by multiplying the voltage output of a single panel by the number of panels. Or if you have panels of different voltages you add the voltage of each panel to get the total voltage of the array.
Connecting solar panels in parallel increases the current of the array and maintains the voltage output of a single panel. The total current of a solar array connected in parallel can be measured by multiplying the current of a single panel by the number of panels. Make sure the open circuit voltage of the connected panels does not exceed the maximum DC input voltage of the power station or controller.